Repair range

After clearing the CMOS will not start

"Symptoms" modify the parameters of the hard disk in the BIOS settings, save and then restart the system self-test, speakers give a warning, failed to start. Close computer, will board above of jumper short received Hou clear CMOS, again will jumper set for default state Hou boot, power led not bright, CPU fan not turned, computer cannot started
"analysis processing"
estimated is in close computer and the socket of switch yihou, computer power plug for socket quality of problem, still in charged state, led to clear CMOS not success. Disconnect the computer power socket and then plug it in, then turn on the computer power switch to clear the fault. BACK PAGE